PENTENS WATER PROOF T200H GREY

Pentens T-200H

UV Resistant Elastomeric PU Waterproofing Coating

Product Features :

• High elongation

• Prevention of ravages of acid rain, freeze thaw, cycles, sunlight, bacteria and fungus

• Water-based, environmentally friendly

• Air and UV protection

• Weather resistant

• Chemical resistant and waterproof

• Suitable use on any surface

• Non-toxic

PENTENS T-200H, which is one-part elastomeric cross linking PU latex copolymer emulsion designed as exposed waterproofing coating on:

• RC gutters and planter boxes

• Floor slabs

• Deck

• Wood siding/Fences

• External wall

• Flat roof

• Metal roof

• Concrete structures

APPLICATION

• Surface Preparation

– Surface must be sound, dry and clean (free of dirt, gravel, pollution, mildew and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.

• Application

– Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water.

– Brush on at the approximate rate of 0.3 kg/m².

– On areas exposed hot drying winds. 2 to 3 thin coats of paint may be more successful than 1 thick coat.

– PENTENS T-200H is suggested to apply at least 2 coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first.

– Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200H can be installed with conventional airless spray equipment, brush or roller.

SAFETY

• Impervious gloves and barrier cream should be used when handling these products.

• Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.

• If contact with skin occurs, it must be removed before curing takes place.

• Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.

• Ensure adequate ventilation when using these products.